Page 3 - YJM Co., Ltd.
P. 3
성형 조건(Molding Condition)
전반부 후반부 호퍼
Front Rear Hopper
250~260 230~240 60~70
단위 대표값
사출성형 가이드(Injection Guide)
(Unit) (Value)
노즐 온도(Nozzle Temperature) - ℃ 260 ~ 270
전반부(Front) 250 ~ 260
바렐 온도(Barrel Temperature) 중반부(Middle) ℃ 240 ~ 250
후반부(Rear) 230 ~ 240
호퍼(Hopper) - ℃ 60 ~ 70
금형 온도(Mold Temperature) - ℃ 60 ~ 70
제습방식 ℃ 90~100
(Dehumidifying method) Hr 2 ~ 4
건조 조건(Drying Condition)
열풍방식 ℃ 90~100
(Hot Air method) Hr 3 ~ 4
건조후 수분율(Moisture Content) - % > 0.05
주의 사항(Customer Notice)
상기 언급된 성형조건은 일반적인 권장 조건입니다. 상기 조건은 박막 사출이나 가스 사출등과 특이 조건에 부합
되지 않을 수 있으며 기기 특성에 따라 일부 조정이 필요할 수 있습니다.
This documentation is made out based on our tests and experiments in our R&D center with piled up experience
and knowledge. And the values are measured on injection molded test specimens. It is suggested that this
information contained in this document can be used for general indication. Therefore, you should construe it
as product specifications, and you should do appropriate test before you considering your conditions for
newly applications.